Design Simulation and Fabrication of a Dual Band Frequency Reconfigurable Monopole Antenna for Wi-Fi and WiMAX Applications

Authors: Prasanna Paga, H. C. Nagaraj, T. S. Rukmini

ABSTRACT
Nowadays, wireless systems require compact multi band antennas that can dynamically change some of its fundamental parameters such as frequency band, polarization and radiation pattern. The novelty of the proposed work lies in using two conducting strips that are perpendicular to each other. The longer strip resonates at 2.4 GHz and the shorter strip resonates at 3.5 GHz. The length and width of the Ground plane is made equal to length of the main arm and length of the side arm respectively. The results are obtained by simulating the antenna structure using simulation tool Ansoft HFSS v15.0. The Simulated antenna Gains were 6.2364 dBi and 7.1758 dBi for frequencies of 2.4 GHz and 3.5 GHz respectively. The antenna dimensions are 50 × 25 × 1.6 mm3 on a 1.6 mm thick FR-4 substrate.

Source:

Journal: Open Journal of Antennas and Propagation
DOI: 10.4236/ojapr.2017.53012 (PDF)
Paper Id: 79387 (metadata)

See also: Comments to Paper

About scirp

(SCIRP: http://www.scirp.org) is an academic publisher of open access journals. It also publishes academic books and conference proceedings. SCIRP currently has more than 200 open access journals in the areas of science, technology and medicine. Readers can download papers for free and enjoy reuse rights based on a Creative Commons license. Authors hold copyright with no restrictions. SCIRP calculates different metrics on article and journal level. Citations of published papers are shown based on Google Scholar and CrossRef. Most of our journals have been indexed by several world class databases. All papers are archived by PORTICO to guarantee their availability for centuries to come.
This entry was posted in OJAPr. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *